Pairing a Bluetooth PTT device in Android and iOS

Pairing a Bluetooth PTT device in Android and iOS

When pairing a Bluetooth Remote Speaker Microphone (RSM) or PTT button, first pair via the device settings menu, as you would pair any Bluetooth device or headset.


To pair the Stone Mountain BluSkye for use with your IMPULSE Wireless app:


- Make sure the BluSkye is turned off and physically near to the iOS device (iPhone or iPad).

- Turn the BluSkye on by pressing and holding the round power button on the rear of the RSM. Continue to hold this button until you see a red/blue flash pattern from the RSM's LED (about five seconds). This indicates the RSM is in pariring mode.


- Go to the settings on the Android or iOS device and enable Bluetooth.

- When you see the Stone Mouintain BluSkye PTT RSM in the options, tap it to pair.

- Observe the flash pattern on the RSM change from red/blue to an infrequent blue flash, indicating it is connected.


For Android, if your IMPULSE Wireless settings have been pre-configured, the RSM is ready to go. If a default callee has not been set for you, you may wish to set this now. Seehttps://support.impulsewireless.com.au/support/solutions/articles/17000121223-activating-the-impulse-wireless-android-application#Set-the-Default-Callee,-so-you-can-transmit-at-any-time-with-the-screen-off


Due to security requirements from iOS, with these devices (iPhones and iPads);you must also pair your devices within the IMPULSE WIreless PTT application. If you are an iOS (iPhone or iPad) user, open the IMPULSE Wireless app.


- Go to the Client Settings Menu under the “More” tab, and select “PTT Button.”

- In the drop-down menu, select Bluetooth LE.

- When the connection is successful, a picture and name of the device displays.



If you require assistance, or have any other questions, please contact IMPULSE Wireless support on

(02) 8705 3778 orsupport@impulsewireless.com.au



    • Related Articles

    • Activating the IMPULSE Wireless Android or iOS application

      TABLE OF CONTENTS Register the IMPULSE Wireless Application IMPULSE Wireless on iOS (iPhone or iPad) Set the Default Callee, so you can transmit at any time with the screen off - Channels mode Set the Default Callee, so you can transmit at any time ...

    • Stone Mountain BluSkye V1 and V2 Bluetooth remote speaker microphones

      There are two versions of the Stone Mountain BluSkye Bluetooth remote speaker microphone. Both versions have the PTT button and volume control on the left edge of the RSM, and a red SOS button on the top. The V2 has additional function buttons, and ...

    • Using BluSkye with Zello for Android

      To use the Stone Mountain BluSkye Bluetooth RSM with Zello for Android or the ZelloWork Android app on your Android phone, please view the below video tutorial. We recommend the BluSkye is running in mode 16 for use with Zello or the ZelloWork ...

    • Manually installing or updating the IMPULSE Wireless PTT application

      If we have loaded the latest version of the IMPULSE Wireless PTT app onto your device, but the device is not updating silently, follow these instructions if we ask you to do a manual update. 1. Navigate to the file manager. On many Android devices, ...

    • Finding your IMPULSE Wireless PTT username

      If you require support, sometimes we will need to know your device or user name. To find this in the IMPULSE Wireless Android PTT app, select the "hamburger" menu at the top left of the app. When this opens, you will see your username, ...